O9IFRONT
WHEEL
RemDYin&
front
wheel
Warning
- Raise the motorcycle with the
lift
stand. (
or
p.
10)
-
Press
the brake caliper by hand
on
to the brake disc in order
to
press back the
brake pistons.
•
Info
I Make sure when pushing back the brake pistons
that
you
do not press the
brake caliper against the spokes.
- Remove screw
•.
- Loosen screw
•.
- Holding the front wheel, withdraw the wheel spindle. Take the front wheel out
of
the fork.
•
Info
I 00 not operate the hand brake lever when the front wheel is removed.
Always lay the wheel down in such a way
that
the brake disc is not dam-
aged.
- Remove spacers
•.
Danler of accidents Reduced braking efficiency due to oil or grease
on
the brake discs.
- Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
- Check the wheel bearing for damage and wear.
>
If
the wheel bearing is damaged or worn:
- Change the wheel bearing.
- Clean and grease shaft seal
rings.
and bearing
surface.
of the spacers.
I Long-life grease
('
r
p.
252)
- I nsert the spacers.
71
O9IFRONT
WHEEL
RemDYin&
front
wheel
Warning
- Raise the motorcycle with the
lift
stand. (
or
p.
10)
-
Press
the brake caliper by hand
on
to the brake disc in order
to
press back the
brake pistons.
•
Info
I Make sure when pushing back the brake pistons
that
you
do not press the
brake caliper against the spokes.
- Remove screw
•.
- Loosen screw
•.
- Holding the front wheel, withdraw the wheel spindle. Take the front wheel out
of
the fork.
•
Info
I 00 not operate the hand brake lever when the front wheel is removed.
Always lay the wheel down in such a way
that
the brake disc is not dam-
aged.
- Remove spacers
•.
Danler of accidents Reduced braking efficiency due to oil or grease
on
the brake discs.
- Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
- Check the wheel bearing for damage and wear.
>
If
the wheel bearing is damaged or worn:
- Change the wheel bearing.
- Clean and grease shaft seal
rings.
and bearing
surface.
of the spacers.
I Long-life grease
('
r
p.
252)
- I nsert the spacers.
71
To Next Page
Loading...
Need help?
General
