13/BRAKE
SYSTEM
RemDYin&
rear
brake
lininp-
Warning
Danger
01
accident
Brake system failure.
- Maintenance work and repairs must be carried out professionally.
Warning
-
Press
the brake caliper by hand
on
to the brake disc in order
to
press back the
brake piston.
•
Info
I Make sure when pushing back the brake piston
that
you
do not press the
brake caliper against the spokes.
- Remove locking
split
pins e. withdraw bolt
e.
and take out the brake linings.
- Clean brake caliper and brake caliper support.
Danler
01
accidents
Reduced braking efficiency due to oil or grease
on
the brake discs.
- Always keep the brake discs free of oil and grease. and clean them with brake cleaner when necessary.
Warning
Danger
01
accidents
Reduced braking efficiency due to use of non-approved brake linings.
92
- Brake linings available from accessory suppliers are often not tested and approved for use
on
KTM
vehicles. The construc-
tion and friction factor of the brake linings and therefore the brake power can differ considerably from the original
KTM
brake linings.
If
brake linings are used that differ from the originals, there is
no
guarantee that they comply with the origi-
nal license. The vehicle
no
longer corresponds
to
the condition at delivery, and the warranty is no longer valid.
- Check the brake discs. (
..
p.
72)
- Check
that
leaf spring 0 in the brake caliper and sliding plate e in the brake
caliper support are seated correctly.
•
Info
I The arrow
on
the leaf spring points in the rotation direction
of
the brake
disc.
- Insert the brake linings, insert bolt
e,
and mount locking split pins O.
•
Info
I Make sure
that
the decoupling
plate.
is
mounted
on
the piston side of the
brake lining.
- Operate the foot brake lever repeatedly until the brake linings are in contact with
the brake disc and there
is
a pressure point.
13/BRAKE
SYSTEM
RemDYin&
rear
brake
lininp-
Warning
Danger
01
accident
Brake system failure.
- Maintenance work and repairs must be carried out professionally.
Warning
-
Press
the brake caliper by hand
on
to the brake disc in order
to
press back the
brake piston.
•
Info
I Make sure when pushing back the brake piston
that
you
do not press the
brake caliper against the spokes.
- Remove locking
split
pins e. withdraw bolt
e.
and take out the brake linings.
- Clean brake caliper and brake caliper support.
Danler
01
accidents
Reduced braking efficiency due to oil or grease
on
the brake discs.
- Always keep the brake discs free of oil and grease. and clean them with brake cleaner when necessary.
Warning
Danger
01
accidents
Reduced braking efficiency due to use of non-approved brake linings.
92
- Brake linings available from accessory suppliers are often not tested and approved for use
on
KTM
vehicles. The construc-
tion and friction factor of the brake linings and therefore the brake power can differ considerably from the original
KTM
brake linings.
If
brake linings are used that differ from the originals, there is
no
guarantee that they comply with the origi-
nal license. The vehicle
no
longer corresponds
to
the condition at delivery, and the warranty is no longer valid.
- Check the brake discs. (
..
p.
72)
- Check
that
leaf spring 0 in the brake caliper and sliding plate e in the brake
caliper support are seated correctly.
•
Info
I The arrow
on
the leaf spring points in the rotation direction
of
the brake
disc.
- Insert the brake linings, insert bolt
e,
and mount locking split pins O.
•
Info
I Make sure
that
the decoupling
plate.
is
mounted
on
the piston side of the
brake lining.
- Operate the foot brake lever repeatedly until the brake linings are in contact with
the brake disc and there
is
a pressure point.
To Next Page
Loading...
Need help?
General
