KTM 400 EXC EU 2011 User Manual

301ENGINE - WORK ON THE INDIVIDUAL PARTS
- Check the pivot points of main shaft. and countershaft • for damage and wear.
• If there is damage or wear:
- Change the main shaft and/or countershaft.
- Check the tooth profiles of the main
shaft. and countershaft • for damage and wear.
•
If there is damage or wear:
- Change the main shaft and/or countershaft.
- Check the pivot points of idler
gears. for damage and wear.
• If there is damage or wear:
- Change the idler/solid gear pair.
- Check the shift dogs of idler gears
I» and solid gears. for damage and wear.
• If there is damage or wear:
- Change the idler/solid gear pair.
- Check the tooth faces of idler
gears. and solid gears. for damage and wear.
•
If there is damage or wear:
- Change the idler/solid gear pair.
- Check the tooth profiles of solid
gears. for damage and wear.
•
If there is damage or wear:
- Change the idler/solid gear pair.
- Check solid
gears. for smooth operation in the profile of main shaft •.
• If the solid gear does not move freely:
- Change the solid gear or the main shaft.
- Check solid
gears. for smooth operation in the profile of countershaft •.
• If the solid gear does not move freely:
- Change the solid gear or the countershaft.
- Check stop
disks. for damage and wear.
•
If there is damage or wear:
- Change the stop disks.
-
Use new lock rings. with every repair.
Pramountlnllha klckstarter shaft
30100(}'10
301001-10
- Mount washer 0 and needle bearing •.
- Mou nt starter wheel •.
- Mount washer. and lock ring •.
140 301ENGINE - WORK ON THE INDIVIDUAL PARTS
- Check the pivot points of main shaft. and countershaft • for damage and wear.
• If there is damage or wear:
- Change the main shaft and/or countershaft.
- Check the tooth profiles of the main
shaft. and countershaft • for damage and wear.
•
If there is damage or wear:
- Change the main shaft and/or countershaft.
- Check the pivot points of idler
gears. for damage and wear.
• If there is damage or wear:
- Change the idler/solid gear pair.
- Check the shift dogs of idler gears
I» and solid gears. for damage and wear.
• If there is damage or wear:
- Change the idler/solid gear pair.
- Check the tooth faces of idler
gears. and solid gears. for damage and wear.
•
If there is damage or wear:
- Change the idler/solid gear pair.
- Check the tooth profiles of solid
gears. for damage and wear.
•
If there is damage or wear:
- Change the idler/solid gear pair.
- Check solid
gears. for smooth operation in the profile of main shaft •.
• If the solid gear does not move freely:
- Change the solid gear or the main shaft.
- Check solid
gears. for smooth operation in the profile of countershaft •.
• If the solid gear does not move freely:
- Change the solid gear or the countershaft.
- Check stop
disks. for damage and wear.
•
If there is damage or wear:
- Change the stop disks.
-
Use new lock rings. with every repair.
Pramountlnllha klckstarter shaft
30100(}'10
301001-10
- Mount washer 0 and needle bearing •.
- Mou nt starter wheel •.
- Mount washer. and lock ring •.
140

KTM 400 EXC EU 2011 Specifications

General

Brand	KTM
Model	400 EXC EU 2011
Category	Motorcycle
Language	English