301ENGINE
ASSEMBLY
146
- Mount free wheel gear O.
- Mount the spring washer.
-
Degrease
the cone
and
thinly apply thread locker to it.
I
Loclile"'
648'"
- Mount primary gear O.
_
Info
I Turn the free wheel gear back
and
forth to
ease
engagement.
- Dil the oil pump shaft, internal rotor
and
external rotor before assembly.
I Engine oil
(SAE
IDW/50) (
...
p.
250)
- Mount oil pump shaft
•.
- Mount
pin.
of the engine oil force pump. Slide
on
the internal rotor with mark-
ing • facing outward.
_
Info
I The marking should
be
visible after installation.
- Mount external rotor
e with the marking facing inward.
_
Info
I The marking should not
be
visible after installation.
- Mount oil pump
shaft.
of the gear oil force pump with
pin.
and
inlernal
rotor
•.
- Mount external
rotor.
with the marking facing inward.
_
Info
I The marking should not
be
visible after installation.
- Position oil pump cover
•.
Mount and tighten screws
•.
Guideline
Screw, oil pump cover M5
6Nm
Loctile-
222
(4.4 Ibf
It)
301ENGINE
ASSEMBLY
146
- Mount free wheel gear O.
- Mount the spring washer.
-
Degrease
the cone
and
thinly apply thread locker to it.
I
Loclile"'
648'"
- Mount primary gear O.
_
Info
I Turn the free wheel gear back
and
forth to
ease
engagement.
- Dil the oil pump shaft, internal rotor
and
external rotor before assembly.
I Engine oil
(SAE
IDW/50) (
...
p.
250)
- Mount oil pump shaft
•.
- Mount
pin.
of the engine oil force pump. Slide
on
the internal rotor with mark-
ing • facing outward.
_
Info
I The marking should
be
visible after installation.
- Mount external rotor
e with the marking facing inward.
_
Info
I The marking should not
be
visible after installation.
- Mount oil pump
shaft.
of the gear oil force pump with
pin.
and
inlernal
rotor
•.
- Mount external
rotor.
with the marking facing inward.
_
Info
I The marking should not
be
visible after installation.
- Position oil pump cover
•.
Mount and tighten screws
•.
Guideline
Screw, oil pump cover M5
6Nm
Loctile-
222
(4.4 Ibf
It)
To Next Page
Loading...
Need help?
General
