31/CARBURETOR
164
- Position
and
tighten
hose
clamp
•.
- Attach engine vent
hose
• to the carburetor.
- Connect the cables.
- Check the throttle cable routing.
(r
p.
37)
-
Move
the handlebar to the straight-ahead position.
- Turn adjusting
screw"
in
as
far
as
possible.
- Turn adjusting
screw.
so
that there
is
play
in
the throttle cable at the throttle
grip.
- Tighten nut
•.
-
Press
and
hold the throttle grip
in
the closed setting. Turn adjusting
screw.
out
until there
is
no
play
in
the cable
•.
- Tighten nut
•.
- Position the carburetor cover. Mount
and
tighten
screw
•.
-
Push
bellows.
on.
Check the throttle grip for smooth operation.
- Install the carburetor connection boot.
(r p.
65)
- Install the fuel tank. (r
p.
67)
- Check the play
in
the throttle cable. (r
p.
38)
(EXC
EU,
EXC
SIX
DAYS)
- Check the choke cable play. (r
p.
37)
- Carburetor - adjust the idle speed. (r
p.
161)
Cbackinlfadjustinllha
carnuratar
componants
Condition
The
carburetor
has
been
removed.
- Check the throttle valve sensor.
(r
p.
165)
- Disassemble the carburetor.
(r
p.
165)
- Check the choke slide.
(r
p.
168)
- Check the jet needle.
(r
p.
168)
}-
._.
J
I
~:A
700073·01
31/CARBURETOR
164
- Position
and
tighten
hose
clamp
•.
- Attach engine vent
hose
• to the carburetor.
- Connect the cables.
- Check the throttle cable routing.
(r
p.
37)
-
Move
the handlebar to the straight-ahead position.
- Turn adjusting
screw"
in
as
far
as
possible.
- Turn adjusting
screw.
so
that there
is
play
in
the throttle cable at the throttle
grip.
- Tighten nut
•.
-
Press
and
hold the throttle grip
in
the closed setting. Turn adjusting
screw.
out
until there
is
no
play
in
the cable
•.
- Tighten nut
•.
- Position the carburetor cover. Mount
and
tighten
screw
•.
-
Push
bellows.
on.
Check the throttle grip for smooth operation.
- Install the carburetor connection boot.
(r p.
65)
- Install the fuel tank. (r
p.
67)
- Check the play
in
the throttle cable. (r
p.
38)
(EXC
EU,
EXC
SIX
DAYS)
- Check the choke cable play. (r
p.
37)
- Carburetor - adjust the idle speed. (r
p.
161)
Cbackinlfadjustinllha
carnuratar
componants
Condition
The
carburetor
has
been
removed.
- Check the throttle valve sensor.
(r
p.
165)
- Disassemble the carburetor.
(r
p.
165)
- Check the choke slide.
(r
p.
168)
- Check the jet needle.
(r
p.
168)
}-
._.
J
I
~:A
700073·01