30lENGINE
ASSEMBLY
Installing
the
shift
forks
301082-10
- Tighten the right section of the engine case in the engine work stand.
- Heat the crankshaft beari
ng.
Guideline
180°C
(176
OF)
•
Info
I
Do
not damage the seal ring.
- Mount the special tool
on
the clutch end of the crankshaft.
I Mounting sleeve
(78029005000)
(r
p.
260)
-
Push
the crankshaft all the
way
into the bearing seat of the right section
of
the
engi
ne
case.
-
Remove
the special tool.
- Slide both transmission shafts into the bearing seats.
•
Info
I
Do
not misplace the washers.
- Mount lock ring
e.
- Thoroughly oil all parts.
- Shift fork
0
has
a smaller inside diameter; mount this in the shift groove of the
main shaft.
Mount shift
fork.
in
the lower shift groove of the countershafl.
- Mount shift fork
e
in
the upper shift groove of the countershaft.
- Slide
on
shift rollers
e.
•
Info
I Fix the shift rollers to the shift forks with grease.
144
30lENGINE
ASSEMBLY
Installing
the
shift
forks
301082-10
- Tighten the right section of the engine case in the engine work stand.
- Heat the crankshaft beari
ng.
Guideline
180°C
(176
OF)
•
Info
I
Do
not damage the seal ring.
- Mount the special tool
on
the clutch end of the crankshaft.
I Mounting sleeve
(78029005000)
(r
p.
260)
-
Push
the crankshaft all the
way
into the bearing seat of the right section
of
the
engi
ne
case.
-
Remove
the special tool.
- Slide both transmission shafts into the bearing seats.
•
Info
I
Do
not misplace the washers.
- Mount lock ring
e.
- Thoroughly oil all parts.
- Shift fork
0
has
a smaller inside diameter; mount this in the shift groove of the
main shaft.
Mount shift
fork.
in
the lower shift groove of the countershafl.
- Mount shift fork
e
in
the upper shift groove of the countershaft.
- Slide
on
shift rollers
e.
•
Info
I Fix the shift rollers to the shift forks with grease.
144
To Next Page
Loading...
Need help?
General
