KTM 400 EXC EU 2011 User Manual

05IEXHAUST 63
Chanlinl the lIass fiber yarn fillinl of the main silencer
Warninl
Danger 01 burns The exhaust system gets very hot when the vehicle is driven.
- Allow the exhaust system to cool down.
Do not touch hot components.
-
Remove the main silencer. ( ... p. 62)
(EXC EWAUS, EXC SIX DAYS)
- Remove screws. of connecting cap •.
- Remove the connecting cap, perforated pipe. and glass fiber yarn filling •.
- Remove screws. and take off silencer cap. with stuffing yarn •.
- Mount the new stuffing yarn. on silencer cap. and fix it with adhesive tape.
- Position the
end cap. Mount and tighten the screws.
- Insert the perforated piping and mount the
new glass fiber yarn filling using a
blunt tool.
• Tip
I To aid you in mounting the glass fiber yarn filling, you can create a
wooden or metal cone piece that is inserted into the perforated piping.
- Position the connection cap. Mount and tighten the screws.
(All USA models)
- Remove screws. of connecting cap •.
- Remove the connecting cap, perforated pipe. and glass fiber yarn filling •.
- Remove screws. and end cap •.
- Remove screws. and take off spark arrestor. with stuffing yarn •.
- Mount the new stuffing yarn on spark arrestor. and fix it with adhesive tape.
- Position the spark arrestor. Mount and tighten the screws.
- Position the
end cap. Mount and tighten the screws.
- Insert the perforated piping and mount the
new glass fiber yarn filling using a
blunt tool.
• Tip
I To aid you in mounting the glass fiber yarn filling, you can create a
wooden or metal cone piece that is inserted into the perforated piping.
- Position the connection cap. Mount and tighten the screws.
- Install the main silencer. (
... p. 62)
05IEXHAUST 63
Chanlinl the lIass fiber yarn fillinl of the main silencer
Warninl
Danger 01 burns The exhaust system gets very hot when the vehicle is driven.
- Allow the exhaust system to cool down.
Do not touch hot components.
-
Remove the main silencer. ( ... p. 62)
(EXC EWAUS, EXC SIX DAYS)
- Remove screws. of connecting cap •.
- Remove the connecting cap, perforated pipe. and glass fiber yarn filling •.
- Remove screws. and take off silencer cap. with stuffing yarn •.
- Mount the new stuffing yarn. on silencer cap. and fix it with adhesive tape.
- Position the
end cap. Mount and tighten the screws.
- Insert the perforated piping and mount the
new glass fiber yarn filling using a
blunt tool.
• Tip
I To aid you in mounting the glass fiber yarn filling, you can create a
wooden or metal cone piece that is inserted into the perforated piping.
- Position the connection cap. Mount and tighten the screws.
(All USA models)
- Remove screws. of connecting cap •.
- Remove the connecting cap, perforated pipe. and glass fiber yarn filling •.
- Remove screws. and end cap •.
- Remove screws. and take off spark arrestor. with stuffing yarn •.
- Mount the new stuffing yarn on spark arrestor. and fix it with adhesive tape.
- Position the spark arrestor. Mount and tighten the screws.
- Position the
end cap. Mount and tighten the screws.
- Insert the perforated piping and mount the
new glass fiber yarn filling using a
blunt tool.
• Tip
I To aid you in mounting the glass fiber yarn filling, you can create a
wooden or metal cone piece that is inserted into the perforated piping.
- Position the connection cap. Mount and tighten the screws.
- Install the main silencer. (
... p. 62)

KTM 400 EXC EU 2011 Specifications

General

Brand	KTM
Model	400 EXC EU 2011
Category	Motorcycle
Language	English