301ENGINE
ASSEMBLY
1\
c;!!!!!!!!io"
00
159
-
Tilt
the motorcycle to
one
side
and
fill
the oil filter housing to about 1/3 full with
engine oil.
- Fill oil
filter.
with engine oil
and
place
in
the oil filter housing.
-
Oil
the O-ring of the oil filter cover.
- Mount oil filter
cover
•.
- Mount and tighten screws
•.
Guideline
1 Screw, oil filter cover
- Thoroughly clean the plug
and
engine oil screen.
-
Clean
the sealing
area
on
the engine.
- Mount and tighten engine oil screen plug with the O-rings.
Guideline
PI
ug,
engi
ne
oi
I screen M17x1.5
110
Nm
(7.4
Ibf ft) 1
20
Nm
(14.8
Ibf
tt)
-
Remove
the screw
cap.
on
the alternator cover
and
fill
up with engine oil.
1 Engine oil
1
0.60
I
(0.63
qt.) 1 Engine oil
(SAE
lOW/50) (
--
p.
250)
- Mount and tighten screw connection
O.
- Thoroughly clean the plug,
gear
oil screen
and
gear oil drain plug.
-
Clean
the sealing surfaces
on
the engine.
- Refit gear oil drain plug with
seal
ring
and
tighten it.
Guideline
Gear
oil drain plug with magnet M12x1.5
- Refit plug
of
gear oil screen with O-rings
and
tighten it..
Guideline
Plug,
gear
oil screen M16x1.5
20
Nm
(14.8
Ibf
tt)
20
Nm
(14.8
Ibf
tt)
301ENGINE
ASSEMBLY
1\
c;!!!!!!!!io"
00
159
-
Tilt
the motorcycle to
one
side
and
fill
the oil filter housing to about 1/3 full with
engine oil.
- Fill oil
filter.
with engine oil
and
place
in
the oil filter housing.
-
Oil
the O-ring of the oil filter cover.
- Mount oil filter
cover
•.
- Mount and tighten screws
•.
Guideline
1 Screw, oil filter cover
- Thoroughly clean the plug
and
engine oil screen.
-
Clean
the sealing
area
on
the engine.
- Mount and tighten engine oil screen plug with the O-rings.
Guideline
PI
ug,
engi
ne
oi
I screen M17x1.5
110
Nm
(7.4
Ibf ft) 1
20
Nm
(14.8
Ibf
tt)
-
Remove
the screw
cap.
on
the alternator cover
and
fill
up with engine oil.
1 Engine oil
1
0.60
I
(0.63
qt.) 1 Engine oil
(SAE
lOW/50) (
--
p.
250)
- Mount and tighten screw connection
O.
- Thoroughly clean the plug,
gear
oil screen
and
gear oil drain plug.
-
Clean
the sealing surfaces
on
the engine.
- Refit gear oil drain plug with
seal
ring
and
tighten it.
Guideline
Gear
oil drain plug with magnet M12x1.5
- Refit plug
of
gear oil screen with O-rings
and
tighten it..
Guideline
Plug,
gear
oil screen M16x1.5
20
Nm
(14.8
Ibf
tt)
20
Nm
(14.8
Ibf
tt)
To Next Page
Loading...
Need help?
General
