381lUBRICATION
SYSTEM
183
Fllllni
UP.
with
Inllnl
all
•
Info
- Place a suitable container under the engine.
-
Remove
screws
•.
Remove
oil filter
cover.
with the O-ring.
- Pull the oil filter
insert.
out of the oil
filter
casing.
1 Circlip pliers reverse
(51012011000)
(
--
p.
255)
- Completely drain the engine oil.
- Thoroughly clean parts and sealing surface.
-
Lay
the motorcycle
on
its side and
fill
the oil filter housing to about
11,
full with
engine oil.
- Fill the oil filter
0 with engine oil and place
it
in the oil filter container.
- Lubricate the Olring •
of
the oil filter cover.
- Refit the
oi
I fi Iter cover
•.
- Mount and tighten screws
•.
Guideline
1 Screw, oil filter cover
110
Nm
(7.4
Ibf
ft) 1
- Stand the motorcycle upright.
I
Too
little
engine oil or poor-quality engine oil results in premature wear
to
the engine.
-
Remove
the screw
cap.
on
the alternator cover and
fill
up with engine oil.
Engine oil
(lst
0.35
I
(0.37
qt.) Engine oil
(SAE
lOW/50) (
--
p.
250)
partial quantity
approx.)
- Mount and tighten the screw connection
on
the alternator cover.
...
Danger
t.,;,J
Dangar
01
poisoning
Exhaust
gases
are
poisonous and inhaling them may
result in unconsciousness and/or death.
- When running the engine, always make sure there is sufficient ventila-
tion, and
do
not start or run the engine in
an
enclosed space without
an
effective exhaust extraction system.
381lUBRICATION
SYSTEM
183
Fllllni
UP.
with
Inllnl
all
•
Info
- Place a suitable container under the engine.
-
Remove
screws
•.
Remove
oil filter
cover.
with the O-ring.
- Pull the oil filter
insert.
out of the oil
filter
casing.
1 Circlip pliers reverse
(51012011000)
(
--
p.
255)
- Completely drain the engine oil.
- Thoroughly clean parts and sealing surface.
-
Lay
the motorcycle
on
its side and
fill
the oil filter housing to about
11,
full with
engine oil.
- Fill the oil filter
0 with engine oil and place
it
in the oil filter container.
- Lubricate the Olring •
of
the oil filter cover.
- Refit the
oi
I fi Iter cover
•.
- Mount and tighten screws
•.
Guideline
1 Screw, oil filter cover
110
Nm
(7.4
Ibf
ft) 1
- Stand the motorcycle upright.
I
Too
little
engine oil or poor-quality engine oil results in premature wear
to
the engine.
-
Remove
the screw
cap.
on
the alternator cover and
fill
up with engine oil.
Engine oil
(lst
0.35
I
(0.37
qt.) Engine oil
(SAE
lOW/50) (
--
p.
250)
partial quantity
approx.)
- Mount and tighten the screw connection
on
the alternator cover.
...
Danger
t.,;,J
Dangar
01
poisoning
Exhaust
gases
are
poisonous and inhaling them may
result in unconsciousness and/or death.
- When running the engine, always make sure there is sufficient ventila-
tion, and
do
not start or run the engine in
an
enclosed space without
an
effective exhaust extraction system.