KTM 400 EXC EU 2011 User Manual

301DISASSEMBLING THE ENGINE 107
RemDYinl the istan
- Remove screw e. Take off seal ring e.
- Pull out timing chain tensioner e. Remove O-ring e.
- Remove screw e. Remove the camshaft support plate e.
- Pull the camshaft out of the bearing seats. Take the timing chain off of the
camshaft gear. Remove the camshaft.
- Remove screw e.
- Unscrew screws. in a crisscross pattern and remove.
- Remove the cylinder head.
- Take
off the dowels. Remove the cylinder head gasket.
- Push the cylinder upward.
• Info
I Only push the cylinder as far up as necessary to take the piston pin out.
- Remove the piston pin retainer
e.
- Remove the piston pin.
- Take
off the cylinder and piston.
- Push the piston upward out of the cylinder.
• Info
I If no further work is to be performed on the cylinder and piston, the piston
can remain in the cylinder.
301DISASSEMBLING THE ENGINE 107
RemDYinl the istan
- Remove screw e. Take off seal ring e.
- Pull out timing chain tensioner e. Remove O-ring e.
- Remove screw e. Remove the camshaft support plate e.
- Pull the camshaft out of the bearing seats. Take the timing chain off of the
camshaft gear. Remove the camshaft.
- Remove screw e.
- Unscrew screws. in a crisscross pattern and remove.
- Remove the cylinder head.
- Take
off the dowels. Remove the cylinder head gasket.
- Push the cylinder upward.
• Info
I Only push the cylinder as far up as necessary to take the piston pin out.
- Remove the piston pin retainer
e.
- Remove the piston pin.
- Take
off the cylinder and piston.
- Push the piston upward out of the cylinder.
• Info
I If no further work is to be performed on the cylinder and piston, the piston
can remain in the cylinder.

KTM 400 EXC EU 2011 Specifications

General

Brand	KTM
Model	400 EXC EU 2011
Category	Motorcycle
Language	English