KTM 400 EXC EU 2011 User Manual

301DISASSEMBLING THE ENGINE 114
- Remove pi ns •.
- Remove screws •.
- Remove oil pump cover. of the force pumps.
-
Remove oil pump shaft. of the gear oil force pump together with internal rotor .,
external rotor. and pin •.
- Remove internal rotor. and external rotor. of the engine oil force pump.
-
Remove the pin.
-
Push oil pump shaft. inward and take it out of the engine from the ignition side.
- Plug the special tool into the crankshaft.
I Protection cover (75029090000) ( -- p. 259)
- Screw special tool
0 on to primary gear •.
I Extractor (75029021000) ( -- p. 257)
- Counteracting with the special tool, take off the primary gear by taking out the
screw.
-
Remove the special tools.
-
Remove spri ng washer •.
- Take off free-wheel gear •.
301DISASSEMBLING THE ENGINE 114
- Remove pi ns •.
- Remove screws •.
- Remove oil pump cover. of the force pumps.
-
Remove oil pump shaft. of the gear oil force pump together with internal rotor .,
external rotor. and pin •.
- Remove internal rotor. and external rotor. of the engine oil force pump.
-
Remove the pin.
-
Push oil pump shaft. inward and take it out of the engine from the ignition side.
- Plug the special tool into the crankshaft.
I Protection cover (75029090000) ( -- p. 259)
- Screw special tool
0 on to primary gear •.
I Extractor (75029021000) ( -- p. 257)
- Counteracting with the special tool, take off the primary gear by taking out the
screw.
-
Remove the special tools.
-
Remove spri ng washer •.
- Take off free-wheel gear •.

KTM 400 EXC EU 2011 Specifications

General

Brand	KTM
Model	400 EXC EU 2011
Category	Motorcycle
Language	English