KTM 400 EXC EU 2011 User Manual

Ol/FORK, TRIPLE CLAMP
Installinalha fork p'rDIBctor
600878-10
(EXC USA, all SIX DAYS models)
- Fully tighten screw •.
Guideline
Screw, top triple clamp
- Tighten screws
•.
Guideline
Screw, bottom triple clamp
(EXC EUIAUS)
- Fully tighten screw •.
Guideline
Screw, top triple clamp
- Tighten screws
•.
Guideline
Screw, bottom triple clamp
MB
MB
MB
MB
- Position brake caliper, mount and tighten screws •.
Guideline
Screw, front brake caliper
MB
- Mount cable clip e.
25 Nm
(1B.4 Ibf It)
17 Nm
(12.5 Ibf It)
12 Nm
(8.9 Ibf ft)
20 Nm
(14.B Ibf It)
15 Nm
(11.1 Ibf It)
Locti!.- 243'"
- Position the brake line and wiring harness. Put the clamp on, mount and tighten
screws
•.
- Install the front wheel. ( -- p. 71)
- Remove the fork legs. ( -- p. 14)
-
Remove screws. on the left fork leg. Remove the fork protector upwards.
-
Remove the screws on the right fork leg. Remove the fork protector upwards.
- Position the fork protection
on the left fork leg. Mount and tighten screws O.
Guideline
15
I Remaining screws, chassis
110 Nm (7.4 Ibf It) I
- Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
I Remaining screws, chassis
110 Nm (7.4 Ibf It) I
- Install the fork legs. ( -- p. 14)
Ol/FORK, TRIPLE CLAMP
Installinalha fork p'rDIBctor
600878-10
(EXC USA, all SIX DAYS models)
- Fully tighten screw •.
Guideline
Screw, top triple clamp
- Tighten screws
•.
Guideline
Screw, bottom triple clamp
(EXC EUIAUS)
- Fully tighten screw •.
Guideline
Screw, top triple clamp
- Tighten screws
•.
Guideline
Screw, bottom triple clamp
MB
MB
MB
MB
- Position brake caliper, mount and tighten screws •.
Guideline
Screw, front brake caliper
MB
- Mount cable clip e.
25 Nm
(1B.4 Ibf It)
17 Nm
(12.5 Ibf It)
12 Nm
(8.9 Ibf ft)
20 Nm
(14.B Ibf It)
15 Nm
(11.1 Ibf It)
Locti!.- 243'"
- Position the brake line and wiring harness. Put the clamp on, mount and tighten
screws
•.
- Install the front wheel. ( -- p. 71)
- Remove the fork legs. ( -- p. 14)
-
Remove screws. on the left fork leg. Remove the fork protector upwards.
-
Remove the screws on the right fork leg. Remove the fork protector upwards.
- Position the fork protection
on the left fork leg. Mount and tighten screws O.
Guideline
15
I Remaining screws, chassis
110 Nm (7.4 Ibf It) I
- Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
I Remaining screws, chassis
110 Nm (7.4 Ibf It) I
- Install the fork legs. ( -- p. 14)

KTM 400 EXC EU 2011 Specifications

General

Brand	KTM
Model	400 EXC EU 2011
Category	Motorcycle
Language	English