KTM 400 EXC EU 2011 User Manual

301DISASSEMBLING THE ENGINE 112
- Take off needle bearing e and collar bushing e.
- Pull balancer shaft e out of the bearing seats and remove it.
RamDYinallla torqua IimilBr
- Remove the screw with the washer. Remove torque limiter e.
- Remove the washer.
- Remove the lock ring. Take off the washer. Take off starter idler gear e.
RllmoYinallla kickstartar idlar par
- Apply counterpressure to kickstarter spring O. Remove screw e.
- Remove spring hanger e. Release tension on the kickstarter spring.
-
Turn kickstarter shaft e counterclockwise and pull it out.
• Info
I The stop disk of the kickstarter shaft usually sticks to the bearing.
301DISASSEMBLING THE ENGINE 112
- Take off needle bearing e and collar bushing e.
- Pull balancer shaft e out of the bearing seats and remove it.
RamDYinallla torqua IimilBr
- Remove the screw with the washer. Remove torque limiter e.
- Remove the washer.
- Remove the lock ring. Take off the washer. Take off starter idler gear e.
RllmoYinallla kickstartar idlar par
- Apply counterpressure to kickstarter spring O. Remove screw e.
- Remove spring hanger e. Release tension on the kickstarter spring.
-
Turn kickstarter shaft e counterclockwise and pull it out.
• Info
I The stop disk of the kickstarter shaft usually sticks to the bearing.

KTM 400 EXC EU 2011 Specifications

General

Brand	KTM
Model	400 EXC EU 2011
Category	Motorcycle
Language	English