KTM 400 EXC EU 2011 User Manual

Ol/FORK, TRIPLE CLAMP 20
- Degrease the cartridge and clamp using the pecial tool.
I Clamping stand (Tl4D15S) ( -- p. 264)
- Warm up the cartridge in the area of •.
Guideline
15D °C (122 OF)
- Unscrew and remove screwsleeve •.
200749-10
• Info
I This step is unnecessary for the further disassembly.
-
Degrease the piston rod.
- Clamp the piston
rod with the special tool.
I Clamping stand (Tl4D16S) ( -- p. 265)
200697-10
- Remove nut •.
- Remove shim stack. completely.
-
Remove piston •.
- Remove shim stack. completely.
-
Remove spri ng 41.
- Remove tap rebound •.
- Remove spri ng •.
- Remove valve. of the rebound damping together with the spring.
- Take out the piston rod.
- 200701-10
Ol/FORK, TRIPLE CLAMP 20
- Degrease the cartridge and clamp using the pecial tool.
I Clamping stand (Tl4D15S) ( -- p. 264)
- Warm up the cartridge in the area of •.
Guideline
15D °C (122 OF)
- Unscrew and remove screwsleeve •.
200749-10
• Info
I This step is unnecessary for the further disassembly.
-
Degrease the piston rod.
- Clamp the piston
rod with the special tool.
I Clamping stand (Tl4D16S) ( -- p. 265)
200697-10
- Remove nut •.
- Remove shim stack. completely.
-
Remove piston •.
- Remove shim stack. completely.
-
Remove spri ng 41.
- Remove tap rebound •.
- Remove spri ng •.
- Remove valve. of the rebound damping together with the spring.
- Take out the piston rod.
- 200701-10

KTM 400 EXC EU 2011 Specifications

General

Brand	KTM
Model	400 EXC EU 2011
Category	Motorcycle
Language	English