30/ASSEMBLING THE ENGINE 152
300024-11
– Remove special tool .
Engine blocking screw (77329010000) ( p. 219)
– Mount and tighten screw .
Guideline
Plug, crankshaft location M8 20 Nm
(14.8 lbf ft)
20.33Installing starter motor
300001-01
– Grease O-ring. Mount the starter motor.
Long-life grease ( p. 210)
– Mount and tighten screws .
Guideline
Screw, starter motor M6 10 Nm
(7.4 lbf ft)
Loctite
®
243â„¢
20.34Installing valve cover
300003-10
– Put the valve cover in place with the seal. Mount and tighten screws .
Guideline
Screw, valve cover M6 10 Nm (7.4 lbf ft)
20.35Taking engine off universal mounting rack
300144-11
– Remove the screw  or the nut .
– Take the engine off the universal mounting rack.
Info
Have an assistant help you or use a crane.
To Next Page
Loading...
Need help?
General
