14/LIGHT SYSTEM, INSTRUMENTS 99
16.7Adjusting the headlight range
– Check the headlight setting. ( p. 98)
800084-10
(690 Enduro)
– Turn adjusting screw to adjust the headlight range.
Guideline
For a motorcycle with rider, the light/dark boundary must be exactly on the
lower mark (made in: Checking headlight adjustment).
Info
Turn clockwise to increase the headlight range; turn counterclockwise to
reduce the headlight range.
If you have a heavy payload, you will need to correct the headlight
range.
800101-10
(690 Enduro R)
– Loosen screw .
– Adjust the light range by swiveling the headlight.
Guideline
For a motorcycle with rider, the light/dark boundary must be exactly on the
lower mark (made in: Checking headlight adjustment).
Info
If you have a heavy payload, you will need to correct the headlight
range.
– Tighten screw .
16.8Removing the headlight mask with the headlight
– Switch off all power consumers and switch off the engine.
100296-11
(690 Enduro)
– Cover the fender with a cloth to protect it from damage.
– Remove screws on the left and right.
– Tip the headlight mask forward and pull it off in an upward direction.
100294-10
– Disconnect the connectors of turn signals and headlight .
– Put down the headlight mask.
To Next Page
Loading...
Need help?
General
