04/SHOCK ABSORBER, SWINGARM 47
8.13Dismantling the damper
– Remove the spring. ( p. 46)
201273-10
– Establish and note the current state of the rebound damping and compression
damping.
– Completely open the adjusters of the rebound and compression damping.
– Remove rubber cap of the reservoir.
– Open screw slowly.
The pressurized nitrogen escapes.
201274-10
– Remove locking cap .
201276-10
– Press in seal ring retainer . Remove lock ring .
Info
Do not scratch the inner surface.
201277-10
– Remove screw . Drain the oil.
201278-10
– Remove the piston rod. Drain the remaining oil.
To Next Page
Loading...
Need help?
General
