KTM 690 Enduro EU 2010 User Manual

04/SHOCK ABSORBER, SWINGARM 45
8.10Installing the shock absorber
300566-11
– Swing the rear end upwards and insert shock absorber  from above.
300565-11
– Mount screw  but do not tighten yet.
– Mount and tighten screw .
Guideline
Screw, bottom shock
absorber
M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™
– Tighten screw .
Guideline
Screw, top shock absorber M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™
300564-11
– Mount and tighten screw .
Guideline
Screw, fuel tank, bottom M8 20 Nm
(14.8 lbf ft)
– Repeat the operation on the opposite side.
300563-11
– Lift the rear fairing.
– Mount and tighten screws .
Guideline
Screw, main silencer
holder on fuel tank
M8 25 Nm
(18.4 lbf ft)
Loctite
®
243™
300562-11
– Mount and tighten screws .
Guideline
Screw, side cover M5 2 Nm (1.5 lbf ft)
– Mount the side cover. ( p. 67)
– Remove the motorcycle from the work stand. ( p. 10)

KTM 690 Enduro EU 2010 Specifications

General

Brand	KTM
Model	690 Enduro EU 2010
Category	Motorcycle
Language	English