KTM 690 Enduro EU 2010 User Manual

14/LIGHT SYSTEM, INSTRUMENTS 96
16.1Setting kilometers or miles
Info
If you change the unit, the value is retained and converted accordingly.
Making the setting according to the country.
Condition
The motorcycle is stationary.
700120-01
(690 Enduro)
– Switch on the ignition by turning the ignition key to position ON .
– Press the MODE button repeatedly until the ODO mode is active.
– Keep the MODE button pressed until the display mode changes from km/h to
mph or from mph to km/h.
Guideline
Activation duration of MODE button 10 s
800083-15
(690 Enduro R)
– Switch on the ignition by turning the ignition key to position ON .
– Press the M button repeatedly until the Odo mode is active.
– Keep the M button pressed until the display mode changes from km/h to mph or
from mph to km/h.
Guideline
Activation duration of M button 10 s
16.2Setting the clock
Condition
The motorcycle is stationary.
700115-10
(690 Enduro)
– Switch on the ignition by turning the ignition key to position ON .
– Press the MODE button repeatedly until the ODO mode is active.
– Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
– Press the MODE button to set the hour.
– Press the SET button to set the minute.
– Keep the MODE button and the SET button pressed simultaneously.
The time is set.
800083-18
(690 Enduro R)
– Switch on the ignition by turning the ignition key to position ON .
– Press the M button repeatedly until the Odo mode is active.
– Keep the M button and the S button pressed simultaneously.
The time display begins to flash.
– Press the M button to set the hour.
– Press the S button to set the minute.
– Keep the M button and the S button pressed simultaneously.
The time is set.

KTM 690 Enduro EU 2010 Specifications

General

Brand	KTM
Model	690 Enduro EU 2010
Category	Motorcycle
Language	English