KTM 690 Enduro EU 2010 User Manual

30/ENGINE - WORK ON INDIVIDUAL PARTS 147
11
22
44
55
66
77
99
88
blbl
bkbk
bmbm
88
bobo
bnbn
bpbp
bqbq
brbr
33
300128-02
– Fix the countershaft in the vise with the geared end facing downward.
Guideline
Use soft jaws
– Mount needle bearing  and the second-gear idler gear  on the countershaft with the protruding collar facing downward.
– Mount stop disk  and lock ring .
– Mount the sixth-gear sliding gear  with the shift groove facing upward.
– Install lock ring  and stop disk .
– Mount needle bearing  and the fourth-gear idler gear  with the collar facing upward.
– Mount needle bearing  and the third-gear idler gear  with the collar facing downward.
– Install stop disk  and lock ring .
– Mount the fifth-gear sliding gear  with the shift groove facing downward and stop disk .
– Mount needle bearing , first-gear idler gear  with the groove facing downward and stop disk .
– Finally, check all gear wheels for smooth operation.
19.39Checking electric starter drive
55
66
11
22
44
33
300129-01
– Check the teeth and seating of the starter idler gear  for damage and wear.
» If there is damage or wear:

KTM 690 Enduro EU 2010 Specifications

General

Brand	KTM
Model	690 Enduro EU 2010
Category	Motorcycle
Language	English