04/SHOCK ABSORBER, SWINGARM 48
201279-10
– Remove compression damping adjuster . Remove the spring, sleeve and piston.
8.14Disassembling the piston rod
– Dismantle the damper. ( p. 47)
300540-10
– Clamp the piston rod with the heim joint in a vise.
– Remove nut .
300541-10
– Remove supporting plate and rebound shim stack together with piston .
Info
Thread the rebound shim set on a screwdriver and set the parts down
together.
200572-11
– Remove compression shim stack with supporting plate .
Info
Thread the compression shim stack on a screwdriver and set the parts down
together.
To Next Page
Loading...
Need help?
General
