Kyocera Torque - Make a Direct Connect Call from Contacts; Make a Direct Connect Call Using a Speed Dial Number

Sprint Direct Connect 52
l PressingandreleasingtheDC Button“pings”therecipient.Therecipient’sphoneemitsan
incomingtoneanddisplaysyournameornumber.Ifavailable,heorshecanchooseto
respondandbegintheconversation.
l Alternatively,youcanholdthebuttonandspeakafteryoufirstpressandhearthetone.In
thiscase,yourvoicewillbroadcastinstantlyovertherecipient’sspeaker.Pingingthe
recipient’sphonebypressingandreleasingmayavoidunintentionalinterruptions.
4. Aftertherecipientacceptsyourcall:
l Waitfor“PushtoTalk”toappearonscreen.
l PressandholdtheDC Button.
l Waitforatonetosoundand“Me”toappearonscreenbeforeyoubegintalking.
5. ReleasetheDC Buttontolisten.
6.
Touch toendthecall.
Note:AllDirectConnectcallsendautomaticallyifthereisnoactivityonthecallforseveralseconds.
Make a Direct Connect Call from Contacts
PlaceaDirectConnectcalltotheDirectConnectnumbersstoredinyourContacts.
1.
PressHome > >People> .
2. TouchanentryyouwanttoplaceaDirectConnectcall.
3. Touchthenumberwith“DC ONLY”or“Direct ConnectXXX”underit.
–or–
TouchDirect ConnectorpresstheDC Button,andselectanumber.
l SelecttheRemember this choicecheckboxfirstifyouwanttoselectthenumberas
defaultforaDirectConnectcalltothecontact.
4. PressandreleasetheDC Button.
5. ContinuetheDirectConnectcallasdescribedpreviously.
Make a Direct Connect Call Using a Speed Dial
Number
PlaceaDirectConnectcalltoassignedspeeddialnumbers.SeeSetUpSpeedDialingfor
informationonassigningspeeddialnumbers.