Operating elements for driving
3.2 Short description of the operating elements
3 - 44 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
3.2.7 ECOS crane control
The truck crane GMK6300L is equipped with the ECOS electronic crane con-
trol (Electronic Crane Operating System). ECOS includes a control unit in
the crane cab, a control unit in the driver's cab and several control units
(ESX0, ESX1, ESX2 etc.) and I/O circuit boards (I/O 0, I/O 1 etc.), which are
distributed on the superstructure and carrier.
Control unit This section contains the operating elements that are the same for all menus
opened.
Buttons F1 to F14
The function of buttons F1 to F14 is shown on the symbol next to or above
the button. After the button is pressed, the function displayed is executed
provided it has been released.
To Next Page
Loading...
Need help?
General
