Driving with a rigged truck crane
13.6 Driving in combined operation
Operating Manual GMK6300L 3 112 xxx en 13 - 13
xx.xx.xxxx
13.6.3 Preparing to drive
Transmission
• Shift into the lowest starting gear; à p. 5 - 32.
In this way you prevent the gears changing up and ensure that the speed
is kept to a minimum.
Switching on
separate steering
Separate steering must be switched on while driving the rigged truck crane;
à Switching to separate steering, p. 5 - 71.
Connections If necessary, you can connect the longitudinal and transverse differential
locks;
à p. 5 - 62.
S
Risk of damage to the steering linkage!
Always switch on separate steering before driving the rigged truck crane
and steer the truck crane only when it is rolling.
The steering linkage can be damaged if separate steering is switched off or
if you steer the vehicle while it is stationary.
To Next Page
Loading...
Need help?
General
