Malfunctions during crane operation
14.1 Emergency stop switch
Operating Manual GMK6300L 3 112 xxx en 14 - 1
xx.xx.xxxx
14 Malfunctions during crane operation
14.1 Emergency stop switch
• Stop all crane movements.
Four emergency stop switches are provided
for emergencies:
• Press an emergency stop switch (1), (2) or
(3). The switch latches.
The engine shuts down.
After activating an emergency stop switch;
à Resetting the emergency stop switch, p. 4 - 24.
H
The battery master switch cannot be used as an emergency stop switch for
the engine. The engine continues to run after the battery master switch has
been switched off.
G
Risk of overloading if used improperly!
Press the emergency stop switch only if it is no longer possible to stop the
crane movements with the normal operating elements.
The emergency stop switch stops the crane movements suddenly. This
may overload the truck crane, e.g. in the event of high working speeds and
large working radii.
1 On the carrier
2 On the hand-held control
3 In the crane cab
To Next Page
Loading...
Need help?
General
