Driving
5.2 Operating the transmission
5 - 28 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
5.2.2 Switching the transmission to the neutral position
The neutral position can be switched on at any time. You should only switch
to neutral position at standstill.
You can only start the motor when the transmission is in the neutral posi-
tion.
• Press the button (2) once.
As soon as the neutral position is switched on, it is shown on the displays (1)
and (3).
While driving If you have shifted into neutral while driving, then proceed as follows to
shift down in order to return to a safe driving mode.
• Release the accelerator.
• Press button (2) once while driving forward.
• Press button (1) once while driving in reverse.
An appropriate gear will be engaged.
G
Risk of accidents when driving in neutral position!
Never switch into neutral position whilst driving.
In the neutral position, you cannot accelerate the truck crane, and the
engine retarder does not work.
To Next Page
Loading...
Need help?
General
