Operating elements for crane operation
9.2 Short description of the operating elements
Operating Manual GMK6300L 3 112 xxx en 9 - 73
xx.xx.xxxx
9.2.10 Outrigger pressure displays
Outriggers
submenu
Outrigger pressure display
Outriggers
control units
Outrigger pressure display
9.2.11 Anemometer display
This function is the same in all the menus.
The anemometer is electrically connected.
– Unit of measurement: Displayed depending on setting
– t – tons or
– klbs – kilopounds – (1 kilopound = 1,000 lbs)
– Precision: One decimal place
à p. 12 - 52
– Unit of measurement: Lights up depending on setting
– t – tons or
– klbs – kilopounds – (1 kilopound = 1,000 lbs)
– Precision: When in t, one place of decimals
When in klbs, no places of decimals
à p. 12 - 52
1 Scale in meters per second (m/sec)
2 Beaufort scale (B)
3 Wind speed display
à p. 11 - 52