Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
4 - 22 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
4.1.13 Setting idling speed
After the engine is started, the idling speed is regulated automatically.
If necessary, you can adjust the idling speed manually using the multipur-
pose switch.
H
You can only set the idling speed when the truck crane is stationary.
Increasing/reducing the idling speed
• Press the switch (2) up/down until the required engine speed (1) has been
reached.
or
• Press the switch (2) up/down once. The engine speed (1) is increased/
reduced by 20 rpm.
Switching off the idling speed change:
• Push the switch forwards once. The idling speed is set automatically.
or
• Accelerate to more than 20 km/h (12 mph).
To Next Page
Loading...
Need help?
General
