Malfunctions during crane operation
14.3 Fuses
14 - 12 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
14.3.4 RCL fuses
When a fuse is blown, a corresponding error code is displayed; Ã Table of
error codes
, p. 14 - 31.
• Loosen the bolts (2) and remove the
cover (1).
• Loosen the screws (4) and fold down the
plate (3) to the front.
• Observe the instructions regarding fuse
changes;
à p. 14 - 5
Fuse arrangement on the RCL control unit.
Pos. Designation Amperage (A)
1 Fuse F1 5
2 Fuse F2 5
3 Fuse F3 5
4 Fuse F11 5
5 Fuse F12 5
6 Fuse F6 5
To Next Page
Loading...
Need help?
General
