Malfunctions during crane operation
14.3 Fuses
Operating Manual GMK6300L 3 112 xxx en 14 - 9
xx.xx.xxxx
14.3.2 Fuses in the crane cab
•
Loosen the bolts (2) and remove the
cover (1).
The fuse groups F3, F4 and F5 consist of eight
fuses each.
The following tables show the designations of
the individual fuses, including their amperage
and functions.
The designations 1 to 8 in the tables correspond to their order from left to
right (fuse 1 is always the left fuse).
• Observe the instructions on changing fuses; à p. 14 - 5.
s
Designation Amperage (A) Function
F3/1 3
ESX 2 supply
ECOS control unit supply
F3/2 2 ESX 2 supply
F3/3 10 RCL supply and RCL control unit
F3/4 5
Remote control
1)
Heating system
F3/5 20 ESX 2 supply
F3/6 5
ESX 2 supply
ECOS control unit supply
F3/7 5 Control lever supply
F3/8 5 Engine electronic system (ADM)
1)
Additional equipment
To Next Page
Loading...
Need help?
General
