Operating elements for crane operation
9.2 Short description of the operating elements
Operating Manual GMK6300L 3 112 xxx en 9 - 63
xx.xx.xxxx
9.2.6 ECOS crane control
The truck crane GMK6300L is equipped with the ECOS electronic crane con-
trol (Electronic Crane Operating System). The ECOS includes a control unit
in the crane cab, an operating unit in the driver's cab and several control
units (ESX0, ESX1, ESX2 etc.) and I/O circuit boards (I/O 0, I/O 1 etc.)
distributed on the superstructure and carrier.
Control unit This section contains the operating elements that are the same for all menus
opened.
Buttons F1 to F14
The function of buttons F1 to F14 is shown on the symbol next to or above
the button. After the button is pressed, the function displayed is executed
provided it has been released.
Error/warning message
Opening the Error submenu
The lamp (1) lights up or flashes.
Opening the Warning submenu
The lamp (1) lights up or flashes.
s
– Flashing: New warning message or error has occurred
–On: Error acknowledged – but still present
– Off: No warning message or error present
à p. 11 - 114
– Press the button
once:
This opens the
Errors submenu
à p. 11 - 114
– Press the button
once:
This opens the
Warning submenu for the
superstructure
à p. 11 - 110
To Next Page
Loading...
Need help?
General
