Rigging work
12.2 Choice of a suitable positioning site
12 - 14 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
12.2.4 Safe distance from overhead power lines
Always observe the regulations in the country in which you are working
when working in the vicinity of overhead power lines.
• If there are overhead power lines within the working range of the truck
crane, have these overhead power lines de-energised if possible.
If this is not possible, you must at least observe the prescribed safe distance (A).
Different safe distances are recommended by the respective national
regulations:
B
Risk of accidents due to electric shock!
The truck crane is not insulated.
If the truck crane, its equipment, its load/lifting tackle or the guide ropes
touch an overhead power line this will cause serious injury or even death.
To Next Page
Loading...
Need help?
General
