Driving with a rigged truck crane
13.6 Driving in combined operation
13 - 12 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
13.6.2 Starting/turning off the engine
In combined operation, the engine for driving can only be started from the
driver's cab – in the main menu.
You cannot start and switch off the engine with the ignition key. The ignition
key must be in position 1 so that the steering cannot block.
• If required, open the main menu ö in the driver's cab.
Symbol (1) displayed – grey
Combined operation off;
à Switching on,
p. 13 - 11.
Starting the engine
The symbol (2) is green.
• Press the button (2) once.
The engine is started – symbol (3) red.
Switch the engine off
Symbol (3) is red.
• Press the button (3) once.
The engine is started – symbol (2) green.
To Next Page
Loading...
Need help?
General
