Manitowoc Grove GMK6300L User Manual

Overview
1.5 Technical data
1 - 14 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Steering Dual-circuit hydraulic steering with engine-independent emergency
steering pump
Tyres 12 x 385/95 R 25 on disc wheels 9.50-25/1.7
12 x 445/95 R 25
1)
on disc wheels 11.00-25/1.7
12 x 525/80 R 25
1)
on disc wheels 17.00-25/1.7
Torque for wheel nuts: 650 Nm (480 lbf ft).
Tyre pressure with cold tyres for axle loads up to max. 12 t
Outriggers
1)
Additional equipment
385/95 R25
2)
: 10 bar (145 psi)
445/95 R25: 9 bar (131 psi)
525/80 R25: 7 bar (102 psi)
2)
Michelin X-Crane 9 bar (131 psi)
Design: 4-point telescoping outrigger system
Control system: Can be controlled from both sides on the
carrier and individually from the crane cab
Outrigger spans: 8.70 x 8.50 m (28.5 x 27.9 ft)
8.70 x 7.40 m (28.5 x 24.3 ft)
8.70 x 6.30 m (28.5 x 20.4 ft)
8.70 x 5.00 m (28.5 x 16.4 ft)
8.70 x 2.71 m (28.5 x 8.9 ft)
7.98 x 8.50/1.00 m
1)
(26.1 x 27.9/3.3 ft)
Outrigger pads Diameter: 700 mm (27.6 in)
Surface: 3,848 cm
2
(596 in
2
)
Stroke of support cylinders 550 mm (21.7 in)
Inclination indicator: On the hand-held control, in the crane cab,
on the
outrigger control units.
Outrigger pressure
display:
In the outriggers, integrated with a display in
the crane cab and on the
outrigger control
units depending on design.
1)
Additional equipment

Manitowoc Grove GMK6300L Specifications

General

Brand	Manitowoc
Model	Grove GMK6300L
Category	Construction Equipment
Language	English