Malfunctions in driving mode
7.3 Towing the truck crane
7 - 8 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Transfer case Prior to being towed away, you must switch the transfer case into the
neutral position.
• If required, open the main menu ö.
• Press the button (1) once.
This opens the
Settings submenu.
• Press the button (1) once.
The neutral position is switched on when the symbol (2) is shown.
H
To switch off the neutral position, you must switch the off-road gear on or
off in the main menu;
à p. 5 - 60.
Parking brake
• Release the parking brake.
The lamp (1) must go out.
If the lamp (1) continues to light up, the supply pressure may be too low. Let
the engine of the truck crane or towing vehicle run on the compressed-air
supply until the supply pressure has been built up;
à Building up supply
pressure
, p. 5 - 10.
If the lamp (1) fails to go out, the parking brake has been damaged, contact
Manitowoc Crane Care.
G
Risk of accidents due to faulty brakes!
If the service brake system has been damaged, you may only tow the
truck crane from the immediate danger area after consulting with
Manitowoc Crane Care.
To Next Page
Loading...
Need help?
General
