Malfunctions in driving mode
7.6 Troubleshooting
Operating Manual GMK6300L 3 112 xxx en 7 - 37
xx.xx.xxxx
When all error messages have been acknowledged, the displays change:
–lamp (1) lights up and
–lamp (2) lights up.
Both displays start to flash again as soon as a new error occurs.
Error display
Each error is defined by an error code (5) and
the symbols (1) to (4).
The symbols stand for:
The error code (5) consists of 4 digits,
e. g. 2332.
• Always note the error code before
contacting Manitowoc Crane Care.
Exiting the
submenu
You can exit the
Errors submenu at any time
• Press the button (1) once.
The same menu opens that was open before the
Errors submenu opened.
H
All errors remain saved until you switch off the ignition, even errors that
have since been resolved. All existing errors are treated as new errors and
displayed again after turning on the ignition.
1 the faulty device
2 the error group
3 The index within the group
4 the error type
To Next Page
Loading...
Need help?
General
