Crane operation
11.3 Crane operation with main boom
11 - 56 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
When the hoist drum is turning, you will notice a pulse on the slewing indi-
cator (1).
You can regulate the speed by moving the control lever and changing the
engine speed with the accelerator.
You can set the desired engine speed (idling speed) with button (1);
à p. 10 - 16.
You can limit the maximum hoist speed;
à p. 11 - 105.
You can switch on high-speed mode for a higher speed;
à p. 11 - 94.
Switching off the
main hoist
If you no longer require the main hoist, you should switch it off to avoid
unintentional use.
• Press the button (1) once.
– The lamp in the button (1) lights up dimly.
– Symbol (2) is red when the main hoist is switched off.
Raise:
• Pull the control lever backwards.
Lowering:
• Push the control lever forwards.
To Next Page
Loading...
Need help?
General
