Driving with a rigged truck crane
13.4 Whilst driving
13 - 8 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Warnings whilst driving
If a buzzer tone sounds in the driver's cab, stop
the truck crane immediately and check
whether:
– The permissible lateral tilt (1) of max. 1°
or
– The operating pressure (2) of 210 bar
(3,045 psi) in the suspension has been
exceeded.
In this case, you must re-level the truck crane
using the Raise axle function as described in
the
Putting the truck crane on the wheels section;
à p. 13 - 5.
G
Danger of overturning by switching on the suspension!
The suspension must be deactivated (locked) while the rigged truck crane
is on wheels.
Switching on the suspension would cause the suspension cylinders to be
suddenly pressed together and damaged, and the truck crane could
overturn.