Malfunctions during crane operation
14.7 Other emergency operations
Operating Manual GMK6300L 3 112 xxx en 14 - 77
xx.xx.xxxx
14.7 Other emergency operations
With the appropriate additional equipment, you can start the truck crane
externally, perform a jump start and charge the batteries.
14.7.1 External starting socket
The truck crane is equipped with a socket for external starting (1) on the
superstructure and on the carrier (
à p. 7 - 42).
If the batteries are discharged, the power supply (24 V) of an auxiliary
vehicle or the socket (1) on the carrier can be used for charging.
• Start the engine of the power source (24 V).
• (A) – Connect the cable (1) to the power
supply.
• Insert the plug (2) into the socket (3).
• Start the engine for driving.
• (B) – Withdraw the plug (2).
• Close the socket (3).
• Remove the cable (1) from the power
supply.
s
To Next Page
Loading...
Need help?
General
