MIMAKI JV5 Series Operating Manual

3-24
Setting Automatic Cleaning
You can set items so that the head cleaning is automatically performed when printing has been completed for the
set length.
When printing has been completed, the machine measures the length of a medium printed after the previous
head cleaning and performs the cleaning automatically if necessary.
The machine can perform a stable printing operation with its heads always kept clean.
Cleaning is performed before the first printing after the machine has started. Then subsequent cleaning is
performed according to the length (by the unit of meter) of a printed medium.
When the operation interval is 1,000 mm (example)
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Press the key.
4
Press to select one of the types (1 to 4) and press the key.
5
Press to select [AUTO CLEANING].
6
Press the key.
7
Press to select ON.
• When selecting OFF, proceed to Step 9.
Set Item Set Value Overview
INTERVAL 10 to 1,000 mm
Interval between each automatic cleaning operation (print length)
TYPE
NORMAL / SOFT /HARD A cleaning type is selected.
Print length: 1.6 m cleaning (3rd time)
Print length: 0.0 m cleaning (1st time)
Print length: 0.8 m no cleaning
Print length: 1.6 m cleaning (2nd time)
Print length: 0.8 m no cleaning
When five images that are 80 cm long are printed in
sequence, cleaning is performed before the 1st, 3rd,
and 5th images are printed.
<LOCAL. 1> [ #01 ]
WIDTH:****mm
FUNCT I ON
SETUP <ENT>
SETUP
SELECT : TYPE . 1
[1]
AUTO CLEAN I NG < e n t >
[1]AUTO CLEANING
SETUP :
OFF
[1]AUTO CLEANING
SETUP :
ON

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English