MIMAKI JV5 Series Operating Manual

6-34
Other Maintenance Functions
Changing the Time When a Warning about Wiper Replacement Is Issued
The wiper is consumable. The head can easily become dirty in a dusty environment.
In addition, the head cannot be cleaned adequately with a bent or worn wiper used. Wiper levels can be set so
that a warning about wiper replacement is issued earlier than the standard according to the operating
environment.
1
Press the key in LOCAL to select the
printing mode.
2
Select [WIPER LEVEL] of the maintenance menu.
(1)Press the key.
(2)Press to select [MAINTENANCE] and press the key.
(3)Press to select [WIPER LEVEL].
3
Press the key.
4
Press to set a wiper level.
• Set value: 1/10 to 10/10
5
Press the key.
6
Press the key several times to end the setting.
Set Value Overview
1/10 ~ 10/10
The time when a warning about wiper replacement is issued is set.
As the value becomes smaller, a warning about wiper replacement is displayed earlier.
Normal wiper Deformed wiper
<LOCAL. 1> [ #01 ]
WIDTH:****mm
WI PER LEVEL
LEVEL : 1
0 /10
WI PER LEVEL
LEVEL :
9 /10
MA I N T ENANCE
WI PER LEVEL <e n t >

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English