MIMAKI JV5 Series Operating Manual

3-21
3
Extended Functions – Printer –
Setting Drying Time
The following items for ink drying time are set.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key .
3
Press the key.
4
Press to select one of the types (1 to 4) and press the key.
5
Press to select [DRYING TIME].
6
Press the key.
7
Press to set drying time.
Item selection:Select one with .
Time setting:Set time with .
8
Press the key.
9
Press the key several times to end the setting.
Set Item Set Value Overview
SCAN 0.0 to 19.9 sec
Ink drying time for each scanning is set.
(During bidirectional printing, the machine stops for a certain period of time
specified for each of the outward and return scanning.)
PRINT END 0 to 999 sec
Ink drying time after printing has been complete is set.
(The next printing is not performed until the set drying time passes.)
<LOCAL. 1> [ #01 ]
WIDTH:****mm
FUNCT I ON
SETUP <ENT>
SETUP
SELECT : TYPE . 1
[1]
DRY I NG T I ME < e n t >
SCAN : PR I NT END
0 .0s : 0 s
SCAN : PR I NT END
0 .0s : 0 s
Scanning:
0.0 to 19.9 sec
After printing:
0 to 999 sec
[1]
DRY I NG T I ME < e n t >

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English