MIMAKI JV5 Series Operating Manual

2-2
User Type for Printing
Register a printing condition according to each of the media that you use in a user type beforehand. When you
replace one medium with another, you can set the optimum printing condition only by changing one user type to
another.
Settings That Can Be Registered in User Types
For the method of registering settings in user types (1 to 4), see P.3-2.
Using the Registered User Types
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Press to select
one of the user types (1 to 4).
• You can also select one by pressing the key.
4
Press the key.
For Selecting a User Type without Using
You can select a user type by using the key in the printer mode without pressing the
key.
Settings
Reference
Page
Settings
Reference
Page
PINCH ROLLER P.3-5 PRE-FEED
P.3-27
MEDIA COMP. P.3-8 COLOR PATTERN
DROP. POS CORRECT P.3-10 REFRESH
HEATER P.3-12 VACUUM
PRINT MODE P.3-16 FEED SPEED LEVEL
INK LAYERS P.3-27 PRIORITY P.3-22
DRYING TIME P.3-21 AUTO CLEANING P.3-24
AUTO CUT P.3-27 PRINT. CLEANING P.3-26
Press to
select the printer mode.
Press to check
[SETUP] and press
.
Press to
select one of the user
types (1 to 4).
Press .
<LOCAL . 1> [ #01 ]
WIDTH:****mm
USER TYPE CHANGE
TYPE ( 1 ) - > <
2 >:ent
<LOCAL. 2> [ #01 ]
WIDTH:****mm
Number of the selected user type

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English