MIMAKI JV5 Series Operating Manual

5-5
Common Settings
5
Extended Functions – Common Settings –
Setting CONFIRM. FEED
Set whether or not to feed the medium for checking when test printing is finished.
1
Press the key in LOCAL.
2
Press to select [COMMON SETUP].
3
Press the key.
4
Press to select [CONFIRM FEED].
5
Press the key.
6
Press to select the length to be fed
(10 to 500mm).
• When having selected [OFF], proceed to Step 9.
7
Press the key to set [BACK FEED].
8
Press to select ON/OFF.
• ON : To slightly take-up the medium fed by the confirmation feeding function.
• OFF: Not to take-up the medium.
9
Press the key.
10
Press the key several times to end the setting.
Set Value Overview
OFF
The medium will not be fed after test printing/cutting.
10 to 500mm
Sets the length to be fed after test printing/cutting. If the length is set, the setting can be set to take up the
fed medium a little. (from Step 7)
FUNCT I ON
SETUP <ENT>
FUNCT I ON
COMMON SE TUP <ENT >
COMMON SE TUP
PR SETUP <e n t >
COMMON SE TUP
CONF I RM . FEED < e n t >
CONF I RM . FEED
FEED : 10
0mm
CONF I RM . FEED
BACK FEED :
ON
COMMON SE TUP
CONF I RM . FEED < e n t >

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English