Omron GX-ID1611 User Manual

7 Digital I/O Slave Unit
7 - 64
GX-series EtherCAT Slave Unit User’s Manual
Notes For the I/O power supply current value to V and G terminals ,refer to "A-5 I/O Power Supply Current" in
Page A - 79.
7-4-12 e-CON Connector Type 32-point Output Slave Unit
GX-OD3218/OD3228
Specification
Item
Specification
GX-OD3218 GX-OD3228
Output capacity 32 points
Rated current (ON
current)
0.5 A/output, 4.0 A/common
Internal I/O common NPN PNP
Residual voltage
1.2 V max.
(0.5 ADC, between each output terminal
and the G terminal)
1.2 V max.
(0.5 ADC, between each output terminal
and the V terminal)
Leakage current 0.1 mA max.
ON delay 0.5 ms max.
OFF delay 1.5 ms max.
Number of circuits per
common
16 points/common
Output indicators LED display (yellow)
Isolation method Photocoupler isolation
I/O power supply method Supply by I/O power supply
Output device supply
current
100 mA/point
Unit power supply current
consumption
100 mA max. (for 20.4 to 26.4-VDC power supply voltage)
Current consumption from
I/O power supply
10 mA max. (for power supply voltage of 20.4 to 26.4 VDC)
e-CON connector
insertion durability
50 times
Weight 210 g max.
Expansion functions No
Error Mode Output Select either hold or clear.
Short-circuit protection
function
No

Omron GX-ID1611 Specifications

General

Brand	Omron
Model	GX-ID1611
Category	Touch terminals
Language	English