Omron Varispeed E7 User Manual

Modes
3-9
Example Operations with LCD Operator
Fig 3.7 shows mode transition examples with the LCD digital operator.
Fig 3.7 Operations in Drive Mode with LCD Digital Operator
 Quick Programming Mode
In Quick Programming Mode, the basic parameters required for Inverter trial operation can be monitored and
set.
The parameters can be changed in the setting displays. Use the Increment, Decrement and Shift/RESET keys
to change the settings. The setting will be saved and the display will return to the monitor display when the
DATA/Enter key is pressed.
Refer to Chapter 5, User Parameters for details on the parameters displayed in Quick Programming Mode.
IMPORTANT
To run the Inverter after viewing/changing parameters press the MENU key and the DATA/ENTER key
in sequence to enter the Drive mode. A Run command is not accepted as long as the Inverter in any other
display.
To enable Run commands from other sources during programming set parameter b1-08 to “1”.
Monitor Display
Frequency Setting Display
Mode Selection
Display
Display at Startup
1 2
1 2
5 6
5 6
A B
A B
3 4
3 4
U2 - 02= OC
Over Current
U3 - 01= OC
Over Current
U3 - 02= OV
DC Bus Overvolt
The Frequency Setting
Display will not be displayed
when an frequency
reference source different
than the digital operator is
used.
Rdy
Rdy
Rdy
ESC
ESC
ESC
ESC
ESC
ESC
ESC ESC
ESC ESC
ESC ESC
Frequency Ref
-DRIVE-
U1-02= 60.00Hz
U1-03= 10.05A
Rdy
U1- 01=60.00Hz
Monitor
-DRIVE-
U1-03= 10.05A
U1-06= 203.5VAC
Rdy
- 02
=60.00Hz
U1
Monitor
-DRIVE-
U1-01= 60.00Hz
U1-02= 60.00Hz
Rdy
- 53
=13.17%
U1
Fault Trace
-DRIVE-
U2-02= OC
U2 -01= None
Rdy
U2-03= 60.00Hz
Fault History
-DRIVE-
U3-02= OV
U3 -01= OC
Rdy
U3-03= OH
Fault Trace
-DRIVE-
U2-03= 60.00Hz
U2 -02= OC
Rdy
U2-04= 60.00Hz
Fault History
-DRIVE-
U3-03= OH
U3 -02= OV
Rdy
U3-04= UV
U1-03= 10.05A
Frequency Ref
-DRIVE-
U1-02= 60.00Hz
U1
- 01
=60.00Hz
Rdy
Output Freq
-DRIVE-
U1
- 02
=60.00Hz
Rdy
U1-03= 10.05A
U1-06= 203.5VAC
PI Feedback 2
-DRIVE-
U1-01= 60.00Hz
U1-02= 60.00Hz
Rdy
- 53
=13.17%
U1
Current Fault
-DRIVE-
U2-02= OC
U2
- 01= None
Rdy
U2-03= 60.00Hz
Last Fault
-DRIVE-
U2
- 02= OC
Rdy
U2-04= 60.00Hz
U2-03= 60.00Hz
Fault History
-DRIVE-
U3-02= OV
U3
-
= OC
Rdy
U3-03= OH
01
Fault History
-DRIVE-
U3-03= OH
U3
-
= OV
Rdy
U3-04= UV
02
** Main Menu **
-DRIVE-
Operation
** Main Menu **
-QUICK-
Quick Setting
** Main Menu **
-ADV-
Programming
** Main Menu **
-VERIFY-
Modified Consts
** Main Menu **
-A.TUNE-
Auto-Tuning
U1-03= 10.05A
Monitor
-DRIVE-
U1-02= 60.00Hz
U1 - 01=60.00Hz
Rdy
Frequency Ref
-DRIVE- Rdy
U1
-01
= 60.00Hz
0
~
(0.00 60.00)
"0.00Hz"
MENU
MENU
MENU
MENU
MENU
RESET
RESET
RESET
RESET
RESET
RESET
RESET

Omron Varispeed E7 Specifications

General

Brand	Omron
Model	Varispeed E7
Category	Inverter
Language	English