Record a Call
You can record all active audio calls on the phone.
You cannot record calls when there are no connected calls, when you place a new call to transfer a call or
initiate a conference, or when you have an incoming call. Make sure to inform your contacts on the call
before you begin recording.
Note that some tones made on your contact's phone are recorded. When you mute the microphone while
recording, your audio is muted and only other participants' audio in the call is recorded.
Procedure
1. During an active call, select Record > Start.
The message “Recording in progress” is displayed in the status bar.
Manage a Call while Recording
You can hold, end, transfer, or set up a conference call while you record or while a recording is paused.
Procedure
1. During a recording, select Back and choose a task to perform.
2. Select Record to view the Recording options.
Pause a Recording
You can pause a recording during a call at any time while the call is active.
Procedure
1. Select Pause.
The message “Recording Paused” is displayed in the status bar.
Resume a Recording
When you resume a recording after pausing, the recording continues within the same file.
Procedure
1. Select Resume.
Recording Audio Calls
Polycom, Inc. 83
To Next Page
Loading...
Need help?
General
