QuickLabel Systems QL-300 User Manual

Safety
QL-300 User Guide 457
List of Risks
The letters shown under “Locations on machine” indicate the locations on the machine as
indicated by the letters on the “Residual Risk Map” for the product. Refer to the “Residual Risk
Map” for the specific location on the machine.
No Job
Qualifications
and training
needed for job
Location
on
machine
Extent of
hazard
Description of
hazard
Protective
measures
implemented
by machine
installer and
user
1 Installation /
transporta-
tion
Carefully read
User Guide
A CAUTION Because the
machine (the
printer alone)
weighs 43 kg,
there is a risk of
injury while lift-
ing it.
Two or more
people are
required to lift
the machine.
2 Installation /
transporta-
tion
Carefully read
User Guide
A CAUTION Because the
machine (the
printer alone)
weighs 43 kg,
there is a risk of
injury if it falls
while workers
are holding the
OP-Assy.
Workers must
hold the
machine at the
specified hand-
holds while
working.
3 Installation /
transporta-
tion
Carefully read
User Guide
A CAUTION Because the
machine (the
printer and
unwinder)
weighs up to 62
kg, there is a
risk of injury if
the machine is
installed on a
table that is
unstable or
unable to bear
the load, such
that the table
overturns or
breaks.
The machine
must be
installed so that
the table on
which it is
installed is sta-
ble.The machine
must be
installed on a
table capable of
bearing the
weight of the
machine.

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English