QuickLabel Systems QL-300 User Manual

Web Utility
QL-300 User Guide 420
Encrypting Communication (IPsec)
You can configure the settings in this section to encrypt and prevent tampering with
communication between the computer (client) and printer at the network layer level.
The IKE protocol supported by this printer is “IKEv1”. The communication mode supported by
this printer is “Transport Mode”. It does not support “Tunnel Mode”. Printer response may slow
down while IPsec is enabled, depending on network communication conditions.
Note: IPsec does not operate with the mail send function or SNMP Trap function.
Setup Flow
Configure printer settings before configuring computer settings.
To configure the printer setup
The procedure below shows how to use the web to enable IPsec.
1 Log in as an administrator. See “Logging in as an Administrator” on page 405.
2 Click in the following sequence: Admin Setup > Network Setup > Security.

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English