QuickLabel Systems QL-300 User Manual

Specifications
QL-300 User Guide 475
Other W2: Paper width 25.4 to 130 mm (1 to 5.12 inches)
L1: Black mark interval 15.9 to 1324.0 mm (0.626 to 52.126 inches)
* The black marks contain carbon.
L2: Paper length 12.7 to 1320.8 mm (0.5 to 52 inches)
L4: Cut size when in cut
mode
101.6 mm (4 inches) or more
However, if the length of one label is less than 101.6 mm
(4 inches), then the shortest length is 101.6 mm (4 inches)
as multiple sheets are cut
L5: Upper edge cutting
margin
1.7 mm (0.067 inches)
L5 ': Position of leading
edge of paper
1.2 to 4.0 mm (0.0472 to 0.1575 inches)
Length of leading margin when paper is loaded
L6: Lower edge cutting
margin
1.5 mm (0.059 inches)
BW: Black mark width More than 5 mm (0.197 inches) from edge of paper;
maximum is width of paper W1 from edge of paper
BL: Black mark length 3 mm (0.12 inches)
A: Top margin 2.12 mm (0.0835 inches)
B: Bottom margin 3.2 mm (0.126 inches) * In practice, it is the length of the
gap
C: Left margin 2.12 mm (0.0835 inches) or more
D: Right margin 2.12 mm (0.0835 inches) or more
Item Specification

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English